World Heritage Rifle Series – Africa


World Heritage Rifle engraving by Michael W. Dubber. When complete the rifle will be auctioned at the 2015 SCI Convention.
World Heritage Rifle engraving by Michael W. Dubber. When complete the rifle will be auctioned at the 2015 SCI Convention.

The greatest compliment an engraver can receive is to be asked to participate in a major project that involves the combined talents of a group of firearms artists. This kind of project typically brings out the best of each of the participating craftsmen, and the results are the production of a very special piece of art that is much more than could be created by one artist alone.

When you initiate a long-term project with a John Bolliger Best Rifle as the first-of-series, the personal challenges are even greater, because the vision of one of these masterpieces naturally inspires

The author engraved this eye popping rifle for Juan Carlos, King of Spain.
The author engraved this eye popping rifle for Juan Carlos, King of Spain.

everyone’s best effort. Added to that is the challenge of performing in sync with four or five other internationally recognized Masters of the Art of Fine Gunmaking. When you finish your part of the project and put your stamp of approval on your own work, you know that your associate artist and the hunting fraternity are expecting something very special. The timing is critical, and it must all come together in a particular order that is ultimately unveiled as a finished piece of art. There are few outside the trade who understand the mechanical and artistic dynamics of such an undertaking.

I signed onto the Safari project knowing all of this, and understanding the challenges of engraving a world-class big game rifle within the framework of all these issues. The sheer size and weight of the metal is a challenge, the hardness of the steel and the complicated surfaces test an engraver’s skill at every turn. It takes experience and a life-time of understanding to approach the limitless difficulties of holding these unwieldy yet delicate and WorldHeritage#2bolthandleodd-shaped parts in a vise to cut straight lines, form concentric scrolls, and inlay delicate gold borders and details.   It all starts with the complications of mating together eight or ten major pieces of metal into a harmonious and pleasing composition that flows from front to back and top to bottom. The animal inlays must be true to life and exhilarating to the viewer. The fraternity of international hunters would not appreciate unrealistic anatomy on such a high level piece of firearms art.

When all of these challenges are considered, the truth is that there is nothing that motivates me more than knowing that I am an integral part of the initial World Heritage Rifle project. My experiences with Safari International go back many years and I can worldheritagecustom22recall a good number of fine Bolliger Rifles I’ve engraved. It’s always been exciting to attend the shows and watch the people scrutinize the guns at the Mountain Riflery display booth. This year will be even more exciting because January, 2015, will be the first time I’ll be able to see the entire project together in one place.

Michael W. Dubber, FEGA Master Engraver, Colt Master Engraver

 

 

Advertisements

4 thoughts on “World Heritage Rifle Series – Africa”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s